Tuesday, September 28, 2010
Preparing to rebuild the Datanetics Keyboard Serial Number 0010
I disassembled this keyboard a couple of months ago so that I could take pictures for the guys out there that wanted to clone it. I ended up sending the board to Mike Willegal, and he is prepared to have a few boards fabricated, depending on demand -- so if you are interested in building a CLONE of this keyboard, plase contact Mike Willegal at www.willegal.net and let him know.
In the process of disassembling, I broke one keyswitch pin, on the spacebar. I will probably replace this switch with one of the "blank/user-defined" keyswitches.
Posted by John at 7:46 PM